Would like to get an idea of what other organizations do with regards to bonuses for FLSA. We were advised by a labor attorney to include signon, relocation, performance/profit sharing, and max pay bonuses in flsa calculations but I get the general impression that this is not what other organizations do. If anyone is willing to share how you have your bonuses setup we would appreciate it.

I am trying to import and process a file for BN532.  I keep getting the error: CSV Hdr Read Error: Fld Name I have compared my file layout to the workdef layout for the BNBATCH file and cannot see anything wrong.  I have checked my jobdef to make sure it specified headers and it does. I have checked the spelling of each header field name and haven't found any errors. I can't think of anything else to do to either get a better error message or find problem. Here is a list of fields: ...

Looking to see if anyone has started a database, spreadsheet or document on how they are resolved Lawson error messages.  Seem odd that there is no help behind the errors.   Thanks

We pay out a number of bonuses on a monthly, quarterly and annual basis.  Has anyone been able to use the PR132 to re-calculate overtime for pay periods that are already paid  If the bonus is a non-discretionary bonus we need to be able to apply that to overtime over any of the pay periods that the bonus applies to.  Not all of our bonuses are specific to one pay period.

Have anyone tried creating a 1094-c xml file outside of Lawson We are on Lawson LSF 9.0.1. Any advise is highly appreciated.   Thanks, Ricky

Our PA100 is automated, as is the creation of our PA52.4 and PA31 for new hires.  The history flags are checked for the appropriate fields on the HR10.     We have a very random pattern of no history being created by the PA100 that is run to process the PA52.4.  It is very random and the same job may create history for one employee and no history for another employee.  The HIRE actions are all over the place as far as dates (future, current, back dated).     We cannot find any commonalities ...

In an employee group, if we want to include all employees that do not have a null (or have any value) in the Benefit Date Field 5, what is the syntax for the beginning value   We have people with varying dates but if they do not have a date they should not be in the group.   Thanks, Wendy

Has anyone applied BSI TF10L Since TF10K had some issues, wanted to check here if anyone applied

We upgraded to BSI10 end of September 2015 and we are having an issue with Infor10 not reporting taxable taxes wages for Associates who live in one state & work in another.  Infor10 pulls tax for both and the taxable wages for the work state but reports no taxable for the lived in state. BSI tells us that the issue is that Infor10 uses 'reportable wages' not 'taxable wages' and this is what is causing the issue. Has anyone else came across this issue We did not have this issue with Infor10 and ...

The employee is non-US and is not on Lawson Payroll.  Has anyone seen this message before

We recently added a remuneration code to the GTL pay code to correct withholding for PA residents so it omits imputed income,  Now the PA income tax withholding is correct, but two of our local taxes for Centennial School District and Lewisberry City are wrong. I would appreciate hearing from any companies who have employees who live in one of these tax districts in PA but work in NJ.   We are v9.01 BSI 10k Karen Ploof Children's Hospital of Philadelphia

Please endorse ER 8176 Please add the new memo field available to view when drilling around on payments/earnings and current time records.  Also, please add the field to PR30 and as an item to select on HR65 detail topic PW.  I see it was added to service records.  Thank you.

Hello all,  hope somebody can help me with a question. We are pretty new to the Lawson software. I need to create a HSA bank file to be sent to the bank with current pay period amounts.  Would anybody know what table(s) that I can pull that data from.   I looked at theses tables but did not find the values that are printed on the PR140 Earnings and Deductions Calc. report.  I thought I could just pull the deduction (DED_CODE)  from the PAYDEDUCTN, but that looks to be a YTD value.   I need the...

Bn320 needs to be consistent in how benefits that end during the range selected display.    Bn320 needs to be consistent in how benefits that end during the range selected display. For years, perhaps as long as far back as 1999, terminated employees displayed on the premium report and exceptions report Now suddenly employees with term dates no longer show on the premium report but if they are rehired, they will appear for that ranges of dates. Similarly, if an employee's coverage ends because...

How do other Lawson clients pay (monthly, quarterly, annual) non-discretionary bonuses to hourly employees

I am a new user to Lawson and cannot seem to find a function that provides a quarterly report of taxes withheld, for jurisdictions by dates. i.e. Pennsylvania state withholding for the quarter 4.01.16 thru 6.30.16. What function will give that information Thnx

Hello. We currently administer our 403b by having two different BN15 plans. I would like to combine into one since there is quite a bit of manual and process upkeep to having two plans. Is there a way to set up as Match Limit type 07, but have the system determine a different Employer deduction start date than the Employee deduction start date We allow employees to enroll immediately upon hire; they are not employer match elig until they have reached one year of service then the following 1st o...

I am attempting to load via addins the user fields on the HR06 job code - via form HR15.3.  I have a template from Lawson for the addins for the HR15.3.   I have it completed but it is giving me an error message: 'Job Code does not exist for the effective date'.  However there is no date field on the HR15.3 or the addins that Lawson provided.

Just an FYI I'm new to the HR module, I primarily work with CM,PA,PR,LP. I'm trying to identify any discrepancies between HRHISTORY and PA54 regarding a particular user field. Doesn't PERSACTHST table flow directly to the HRHISTORY table Any ideas what tables, etc. may be the best way to narrow down any variances Thanks for any help!

Can somebody please advise me on which database table or tables the following information is stored/housed in: 1 - The 'Review Ratings' that are displayed under 'Review History' in ESS (ESS > Employment > Review History) 2 - The 'Percentage Change' and the 'Pay Rate' (as of each historical effective date) that are both displayed under the 'Pay Rate History' in ESS (ESS > Pay > Pay Rate History) Thank you.

Going forward into 2016 ACA reporting, do we skip BN729 and BN529 (for ACA Data Collection Offer) and BN954 and BN554 (for ACA Hours Update) and only run BN149 and BN990 to generate 1095-C It is recommend to run BN149 on monthly basis to review. Are we just running it in 'Report' status for review I am afraid to run it in 'Update' status because I do not know if the program will be overwritten with the latest update.  Thank you in advance. Christine

Someone accidently changed a deduction on PR14 for an employee to a Descending Balance Type that should not be descending and should always pull amount from one time deduction screen (PR39).  Now when the amount for that deduction is loading into the PR39 (via a file submitted every pay).. the value does not pull over to PR14 and the payroll department has to manually update the PR14 so the deduction takes.  If you remover the D on the balance type the PR14 record still forces you to put an amou...

Good morning!! Does anyone do Company/Department Specific security within Human Resources via S3 or LTM.  Our organization has multiple companies under one umbrella.  A couple of these companies of hired their own HR staff.  With this we are wanting to make sure that those HR employees are only allowed to see those employees that are part of that company and not all employed organization wide.  Our organization went live with Lawson for Supply Chain and AP January 2015 and we have been using ...

We are trying to get the newer/and not so new Flows to work.   It looks like we have EMSSTaxEmail enabled but no email is sent to employees.   Can anyone help us out with what we are missing   Thanks.

Our system currently has all employees records since several decades. We would like to purge any data before year 2001 (retain only 15yrs of data). Pl advise how do we accomplish how easy or hard it is