LSF 9.0.0.5, W2003 ... I have heard that the ADAM service must be up when taking a backup ( on the LSF9 server.  Is this true  Is this true if needing to do a restore

Anyone have steps for installing WAS ND 7.0 IE Recommended selections for launchpad.sh. I can't believe Lawson can provide the gz files, but not a single install guide.

This is my first post and I thank everyone in advance for their time. We recently did a fresh new install of Lawson 9.0.1 along with the latest websphere, LUU etc...data was exported from our exissting data from a 9.0.0 env At this point, everything is fine except with Addins performance. The new environment is Virtual with Windows 2008 Server std x64 and SQL 2008 Server R2 x64 with separate PROD and TEST environments. The environments are equal except for PROD is using Raw Data Ma...

I cloned our regular development product line for a testing area for our users.  Every thing seems to be working fine, except that the search box does not return the same results as the original product line.    For instance, when I type 'step' in the seach box in the original product line, I get 6 hits for the word 'step'.   In the new clone, I get 'No programs or bookmarks were found for 'step'. Is there a step that I have missed  I followed my usual procedure for creating product lines...

I'm relatively new to Lawson, but I've been implementing applications for over 15 years. I'm trying to get a better understanding of Lawson (finacial) portal and authentication. Where can I find the ldap functionality and information on how Lawson authentication is configured

Ever since we migrated our environment from 9.0.0.9 to 9.0.1.9 and application from 8.0.1.7 to 9.0.1.9, our users have experienced intermittent slowness or hanging on LID and portal. The LID user will see the hour glass and everything is frozen up. It normally lasts less than a minute and then it works again. We are on AIX 6.1 and Oracle 11g. This types of intermittent hanging has never happened in our old system. Any suggestions willl be highly appreciated!!

Hi.  I have a user that when they add comments to a purchase order via PO20 the comments do get added. After adding comments the user goes back in and the comments don’t show. The user ends up having her supervisor add them. This doesn’t happen all the time only now and then. Any ideas I would appreciate. Thanks.

We're going from 9.0.1.5 to 9.0.1.9.  Our 9.0.1.5 is currently on 1.5 java.  The requirement for 9.0.1.9 is 1.6 java, so we need to upgrade that first. From your experience, what is the easiest way to do this, especially considering there are two javas - java and websphere java

We have a custom program built off of BN106 in our 8.03 system that we need to move to 9.01. I believe the changes are limited to the WS and PD members so I will be making copies of these on the 9.01 side and rolling in the custom code. Other than that what are the best practices / steps for moving this program across Thanks.

We installed a new websphere and deployed the ear files, generate/propagate the plugin, but we receive ssoconfig/SSOCfgInfoServlet errors Also, calls to /servlet/What, /servlet/Router, etc, are returning 404, and server.xml configuration files are missing some lawson specific tags that the old server.xml had.  (Just copying the server.xml over does not work) Someone please point me to lawson documentation or some kind of tips on how to make websphere work with lawson from start to finish, ...

Would like to hear any tips anyone has regarding DB2 upgrade on AIX In particular, I want to do the upgrade in-place.  For example, I already have 9.1, and I just want to upgrade it to 9.5 (or 9.7) without installing a second copy of db2 anywhere.  What's the best way to do this  Is it possible I found this on google http://publib.boulder.ibm.com/infoc...to_97.html but the DB2 9.1 delivered by lawson doesn't have any db2ckupgrade or db2iupgrade Thanks as always Phil

Good afternoon all, We are having the same error messages on Event Viewer, of this old topic: https://www.lawsonguru.com/default.a...amp;afpg=1 Have you found the cause of the error messages Thanks a lot

Has anyone used iTera Echo2 with Lawson Software as their Disaster recovery replicated solution.  We have an off site building and we use this software for our other systems on AS400, but currently are still keeping back ups for our Lawson DR.  Any assitance would be appreciated, thanks.

We have recently installed an LSF 9.0.1.9 Lawson system on an AIX 7.1 server using MS ADAM on a seperate machine. The DB is DB2 and also resides on its own physical machine. The portal seems to run very slow upon initial login to the system and upon drilling / inquiring on data.  Does anyone have any performance tips that may help this situation out.  Thanks in advance.

We are running LSF 9.0.1 on Win 2008 R2 VM server with 8 processors and are working on some performance tuning.  We’ve been monitoring the usage on the server and have noticed that CPU usage is usually around 15-20.  To see if we could improve performance and use less resources, we dropped the server down to 4 processors.  We are not sure if users see any significant increase/decrease in wait times (one usually only hears about the increase waits), but from a monitoring perspective we see that ...

How do I compile a 4GL program using the NetExpress 5.1

Hi! We have created a service in WAS to inteface to lawson.  It logs on using lhc.jar and then creates a gl165 job using ags calls and runs it using jobrun.exe. For some reason, in unix server 1, which has the WAS server and the Lawson Apps, its able to create the job but not able to trigger the job using jobrun.exe.  When I point the interface to the 2 other lawson productline with 2 other productline in the the same server unix server 1, the same error happens. Then if I point the ser...

Forgive me I am a little new to the Lawson application but have an issue I would like to see if I can get help with. LSF9 setup with SSOP and it seems that the RMIds on these users are being set as lowercase. After sometime since implmentation we see that a duplicate RMID is being placed in the user security but is of mixed case matching exactly what is in our Active Directory sAMAccountName attribute. This results in the user security having two RMIDs one is the username in lowercase (ie. fm...

Does anyone have any type of documentation as it relates to the performance tuning of DB2 on an AIX system.  We seem to be running very slow on data related actviites in both portal and LID ..... Anything is appreciated.

I'm trying to clean up 2 gigs (sometimes more) worth of DB2 SQLOGDIR transaction logs (or is it just 'logs' not sure what db2 calls them) which has been one of the bigger nuisances of DB2 Consulting db2 docs ( http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsptopic=2Fcom.ibm.db2.udb.admin.doc2Fdoc2Fr0001992.htm ), I've tried the prune (including with force and delete) command with no results.  The list history command shows no logs, but gigs worth of physical files are still th...

We have upgraded aix 5.3 to 6.1, and are redeploying lawson as per kb 5431593 However, installer gave us a LDAP error: Fatal: [install-sec.pl] RMPARENTDN, o=lwsn,DC=dfkcorp,DC=com, cannot be found on your ldap server And now we can't start lawson. (TDS is running just fine) Looking at ldap with jxplorer (using login info in install.cfg) shows the entire COM tree, with our DN in it, is completely gone. Now, I'm no ldap expert, so am I missing anything here   Is there anything we c...

Hello all, We have an internal portal that offers SSO to some of our company's applications, and we would like to offer SSO into the Lawson Portal.  From what Lawson has told me, they do not support this, though some clients have implemented their own solutions (for example I think Microsoft is using SAML to get to the Portal, but I could be wrong).  I can do a form POST to SSOServlet passing _ssoUser, _ssoPass, _ssoLogin, _action (LOGIN), _fromLoginPage (false), _language, _serviceName (SSOP...

Hello Everybody..... Guys in need some help....anybody can tell me how i can create user in lawson S3, specifically for HR modules By the way, im from Chile and we are implementing Lawson S3. Thank for the help.

I am shortly going to upgrade Lawson to 9.0.1.9 :153, immediately followed by a further 28 patches to bring me up to version 561. No problem with that. I am also going to upgrade AIX to the latest service pack, so I shall be going from 6100-04-07 to 6100-07-05; plus I shall be putting WAS to the latest fixpack, 7.0.0.3 to 7.0.0.23 Is there a preferred order in which to make these upgrades. They will be done consecutively on the same day. Should it be OS, WAS, Lawson Or Lawson first Or sh...

We have been encountering login failure on LID . We are on 803 on Sun. Users see the Login error 'Could not open screen' message. I should have put this detail : The users are able to login subsequently (the second time ) though ! Sorry if the problem description was not clear . Any insight  or help is much appreciated ! Thanks