All: Has anyone encountered where sometimes a Portal session will hang (indefinitely) with or without 'x number of items remaining' displayed in the status bar This 'seems' to be happening a LOT here, just after we do a search for a Lawson form from the upper right corner's search box. Any help would be greatly appreciated. Thanks, -Greg Moeller System Administrator

When the Global Security in WebSphere is turned on, starting the WebSphere services through windows services will not start - somehow after applying some environment patches, the SSL got foobarred - the services cannot complete the handshake. Does anyone have any instructions on how to configure WAS and SSL to work with LSF 9 or how to redeploy the application, perhaps Any help will be much appreciated. Thank you!!

Hi there, Has anyone made the jump from one core technology level to another  I want to update from 9.0.0.3 to 9.0.0.5.  Lawson has instructed me to follow the 'Installing Lawson Core Technology Updates' chatper inthe Core Technology Installation guide.  The guide is quite vague and does not instruct what files to download (I know the patch files to download, but the core 9.0.0.5 files).  Does anyone know where I can get better documentation  Does anyone have any words of advice  Thanks! ...

We're using 'laprint' on our Windows Server to print Lawson reports. When we do 'laprint -z7' the font size is very small and hard to read. When we do 'laprint -z8' the font size is readable, but then the reports are truncated along the right-hand side of the page. I tried 'laprint -z7.5' but the '-Z' option doesn't allow decimal values. Does anyone have suggestions (besides printing landscape) Gracias. -Michael

Are Oracle users out there using the varchar option for most or all tables  For all columns or just non-indexed columns We have always used VARCHAR for all the non-indexed columns and have no issue with it.  But lately I've begun to think that we should really be using this option for all columns.  The space savings would be significant and I can't see any real drawbacks at the moment.

Hello, I work at 400'ish bed hospital with around 3500 employees (educational setting). We are currently running Lawson for GL, Procurement, RSS, A/P, MSCM with some Enterprise Reporting and a little ProcessFlow thrown in. We are looking to roll out an upgrade which includes all of the above in an LSF9 (Windows/SQL) environment plus H/R, Benefits, ESS, Talent Management, Payroll, and LBI. What sort of I.T. resources are other companies finding they need to run a system like this  Please...

How do you determine what to test and how extensive testing should be for an env patch  Many patches have 80 or more files in the patch and it is difficult to determine what changed (or what may have broken) in the patch.  We are having an internal debate on what constitutes a 'full regression test' and how much time and effort is involved.  What is your approach to applying patches and how often do you install ESPs

Hello!  Currently we have two Lawson environments - one on our production server, one on our QA server.  Both are running LSF9, Apps 9.0.  We would like to create a 'Development' environment so that we can apply and test patches/updates without impacting user project testing that occurs in the current QA environment.  Can this be done easily  Or does it require a new, full install of LSF, Apps, etc   If creating a new environment is difficult, can a similar division be created using a new pr...

Hi All, We have installed a test LSF9005 in the following configuration: WAS  1 Lawson Env on server 1. IBM Tivoli HTTPPlug-in on server 2. We'd like to install a second Lawson Env on server 1 and managed by the same WAS. When reading general documentations, it's quite possible, but we are wonder how it can be possible. The reason is, using the WAS console -> Application server -> server1 -> server infrastructure -> Java and process management -> Environment entries . Here we have to har...

Hi All, During the Lawson Core technology LSF9 installation, there is a step for 'Configuring Resource Management' where a valid DN is required. We have created a valid DN by copying an existing DN, which was imported from an existing LDAP instance ( for test purpose). We would like to CREATE a valid and empty DN for the new installation of LSF9. Is there a easy way to create this DN The tool 'Tivoli Diectory Server Web Administration tool' looks quite complexe for this task. We just want...

Hi, We are getting ready to publish our ESS sets to the outside world and I have the v8 ESS and ISA working very well. I see in the WWW thread that user schlenk was successful in getting v9 working with ISA and would be very interested in any input he might be able to add. Currently I am stuck with the url error message. I have not created another endpoint and would like to avoid doing this if possible....I have 20 environments that would need to be done. Thanks. jellis

Hi All In the last few weeks since we have migrated our servers to a new IP address we have been getting reports from users wherein they see the lawson login portal screen in the middle of a  transaction. When they re-enter the user id and password they can carry on without issues and the transaction is saved. We are on a Win 2003 Server with LSF9.0 and a SQL2005 backend. Has anyone experienced anything similar or has ideas of what i can check Thanks Saurabh

Hi All, We are testing our first LSF901.4 installation. At the step 'Deploy Lawson web application to Websphere 6.1' and for the IOS-ws.ear. The installation of the 'Application IOS' was successfull, but once done, we cannot start it. While the 2 others : bmp and lawsec were installed and started successfully. Lawson support does not want to assist because we are not certified installer. From the server1 SystemOut.log, we can read: [6/17/09 16:29:08:115 CEST] 00000034 DeployedAppli W   WS...

For a development reason, I want to remove/clear an existing field condition on a specific field in a Lawson-delivered table using dbdef. Ok, so I'm in the table editing screens, and I'm clearing out the condition, and then try to 'save' the field.  (I'm using F9 to delete each line in this condition). When I try to save the field (by pressing Enter twice) I get the message: 'Incomplete Conditional Field, Cannot Save' at the bottom of the screen. Thus dbdef apparently won't allow me to re...

We are trying to set up a DR box with all of our data ready to go.  We have a SAN that is set up to replicate all the data on it to another box and that comes up fine.  However, Tivoli was installed into /opt and we are having problems starting it.  We have copied all the files we believe are used for Tivoli but it will only start in config mode.  Does anyone have a document that outlines exactly what to files to copy, etc....  I haven't been able to find a good DR document on Lawson's website....

Hi All, We are running with Application 803 MSP12 and want to upgarde to 901. What will be the shortest path Based on Lawson Article ID:557153, It looks like we can upgrade in one shot from 803 MSP12 to 901. But based on the latest Data Promotion Program available for us, we have only the DPP for going from 9004 to 901. So we suspect that we have to go in 2 steps: - first from 803 MSP12 to 90004 - then from 9004 to 901 Has anyone have such experiences TIA

Hi all, We'd like to test some Oracle DB Partitioning. To give Oracle full power to choose the best access path from it's optimizer, after the implementation of db partitioning, we want to disable the default Oracle hint in a batch. Is there a way to do that, instead of specify all indexes that the batch may used in a .cfg file TIA

Hi, We want to test a restore of our aix 5.3.7 production box (SRVAS) which is the oracle and websphere server to a spare(SRVAS2) and do likewise with the apache webserver (SRVWS - SRVWS2).  We would like to do this without having negative licensing or connectivity issues and so we are trying to develop a check list of things we need to be aware of before we start the database.  For example things like the webserver address being stored in the websphere bpm.properties and making sure the cronjob...

I have 2 database questions, (1) How often do we need to truncate the transaction log in the database or what size I need to keep Our transcation log file is growing too big and wonder what size I need to keep (2) Is there any risk to rebuild the index from LID  Will it cause the database fail or something else Any input will be much appreciated. Thanks!

Hi, all!! I have a sys admin type question.  I'm working with the PR292 final files and have found that we need to do a search/replace in them...  don't get me started, please. I'm using the following: sed -e 's/some text/other text/g' output.txt I'm getting nothing but zero byte files for output.txt does sed have a limitation on line length  Some of those final files can get upwards of 30,000 characters on one line.  (That is how IL has to have them.) Other ways to do this  ...

I recently switched our Lawson and LBI to use completly SS including all ldap calls going over on LDAPS protocol porrt 636, our LDAPBIND is also set to SSL. The application and LBI are working well since past few months since the upgrade. A week ago I got ready to apply my first LSF post patch after SSL configuration. As you are already aware when u install patch using Lawson java installer it validates if ldap is running, it is failing here. The error ii see is unable toc onnect to server port ...

Currently we are at 9.0.0.5(env),8.0.3 MSP 11(App), AIX 5.3.2, Oracle 10g, Websphere 6.1.0.17.Apache is the webserver. We are a healthcare company & we use most of the suites in Lawson. I would like to know if someone has considered a Purging & Archiving solution  What was the approach  Also, any thoughts on the product from the Revere group Thanks.

We are on Windows and upgrading from 8.0.3.7 to lsf 9. I noticed that the lawdir variable has changed from \LINTE\APPS to LSFAPP\LAW. It appears that for work files such as pr530, I need to change the external filename to accommodate the change in file structure. Is there a way to plug in the variable versus hard coding the filename with path' I've tried lawdir/productline/work/filename and I get the error; no such file or directory. Is my syntax incorrect or will I have to change all o...

Has anyone used this I finally got the command to work but it returns an error.  Running in SQL analyzer window drawing from driver, not linked server. select * from OPENROWSET('Lawson.LawOLEDBC.4','server.com';'id';'pw', 'dmeROD=PROD90&FILE=APINVOICE&FIELD=ACCR-CODE;COMPANY;CREATE-DATE;INCOME-CODE; VENDOR;INVOICE;DISTRIB-DATE&SELECT=DISTRIB-DATE3D20090630&INDEX=APISET1&KEY=20003D550123D3D') Error: Server: Msg 7350, Level 16, State 2, Line 1 Could not get the column information ...

We're still in the implementation phase of Lawson. The users have been working in a training pdl, and as of next week, will be moving to a conversion pdl. I'm being asked if we can somehow get the User Analysis values copied over to this new pdl, however the users don't want all of the data copied over from training. LIS states that they don't support copying this data unless i'm copying the entire database, but then through out the hook 'however, if you know of some way that has worked for yo...