I am trying to figure out the conditional rule that would allow for specific department(s) and/or security class to only have inquire access during a specific time/date. They would still be able to access forms and reports based on their security class, however, only be able to inquire.

I have used it in the passed on both production system and development system.  currently when I try to run in in either environment I get the following error: Unable to start process. Process currently locked by none. Current status - Process Completed Successfully if I click on Reset Mass Assignment it says Unable to reset.  Current Status - Process completed successfully Anyone seen this before

Hi, We are on Lawson 7.2.3 (informix), I know its pretty old but client is quite happy to continue with it. Is there any command line utlity (opposite to importdb command) that can delete some particular records from  a GEN table The tables can't be accesed via SQL's and there is not any API for the same. Currently, I am figuring a way to delete some records (not all) from USEREXE table.   Thanks, Vijay

What is the security setting to allow someone to recover a job but not delete an update job Thanks in advance!

Hello,      I am attempting to use LSA from my PC, but receive time out errors and 403 Forbidden messages in the log file.  I am able to connect when I am on the server.  It is only a problem when attempting it from any PC.  I have been working with Inforxtreme support on this for about two weeks and have not found a solution to this.  Has anybody else seen this  Attached is a log file from one of the attempts.  Thank you.

We are in the planning stage to transition from laua to LSF 9 security.   There are users who will be accessing LBI for financial reports only.  Is it possible to set up a single security class for these report users (say for the AP275 bursted report) using the AccountingUnitControl to limit their drill around to their respective departments   I’ve seen in KB where you have to use the IsAttributeInRange to evaluate ranges of values in the AccountingUnitControl.  Wh...

I am part of a project to migrate my organization's small Lawson environment to Lawson 10.  It's a very small setup, just using AP, GL and PO.  We already have a security setup that management wants to keep as intact as possible. I don't know when I'm going to get to training, and I'd like to have at least some knowledge of what's going on before the migration begins.  I don't want to sound like a complete n00b, but if anyone can point me to a tutorial, I'd greatly appreciate i...

I am in the process of switching my company to Lawson Security. We have a CL that uses LAIBCH7, and are getting security violations when the Wait for Completion parm is set to *YES, but when we use *NO it produces a sheet of paper with only - Job Has Been Submitted - on it. I don't see wtsubmit available to give a class authority to it, just jqsubmit. I know this was kind of answered in a previous topic I found, but I don't know how to define wtsubmit in order to use it in La...

I have a listing of Analyst codes and names on AR06 and would like to keep the AR pieces seperated by these names. I see, for instance, that the AR251 has a selector on the Customer tab for Credit Analyst, and that LSF has a form.ANLYST_NAME object but I am not sure how to write the rule so a user can only see their grouping. Would I assign the rule one time, or on each screenthat contains the Credit Analyst field

I need to find a way to copy the xml file from production to test.  In my current process, I create/edit/add/remove security in production but don't always make the same changes in Test.  I need to find a better way to keep security in test the same as production. I heard this can be done, but I have not seen anyone do it. Any suggestions

We are an LSF9 shop on Lawson 9.0.1 and have a large number of existing users that need either 1 or 2 new Roles & Groups added to their RM.  Can loadusers update their existing records or is there another way to do this

My company had a lawson admin who was let go and no longer here...she did not pass on any information what-so-ever regarding lawson to anyone, so here I am trying to figure it out on my own.  I need to create a new user in LSF9 for the security admin tool...and I cannot access the portal or find out how to get to the tool.  Nobody knows the user name for the portal.  I have no idea what file or where to find this information in so that I can either reset the password or grant acce...

Is there a way to export the Groups in RM for all users

According to Chapter 9 of the 8.1 laua security manual, a condition can accept up to 256 statements.  The manual also states that the maximum number of conditions per security class is 16,388. We are using 8.03 laua and defining element conditions using either acct unit or person resp fields from GLNAMES in the statements. In our version, the element condition will only allow 8 lines of conjunctions (i.e., acct unit = “9392” or acct unit = “6011”, etc.)  T...

We just recently added technology patch P22057 to our LSF 9.01.9. This was for JT 423641.  We are having drill around issues with the element group ProcLevel. Since we have added the patch whenever I go into a security class with LSA and i try to edit an existing conditional rule or create a new conditional rule I get the following error message. rule evaluation: Error while initialinzing scope for rule evaluation has anyone seen this before

There is a new (big) patch for security and the environment for versions 9.0.1.11, 10.0.1 and 10.0.2 of LSF. This patch was made available early June 2013. For all versions, it's something like this (also referencing the KB here too). KB 1400985 HREMP Element Group rule switching SECURITY-LEVEL and LOCATION VALUES When I saw this, it was of great concern to me, since if your security roles are using the standard HREMP element group, basically this is implying that your LS securit...

Can we keep the old LAUA security and not upgrade to Lawson security (role based) security when we upgrade our code to Version 10

I am wondering if there is a Lawson method for copying a LSF9 security structure from one LDAP environment to another.  Please note, I am not looking to copy security profiles, classes, or roles, but the security structure defined in the RM Administrator. If not, does anyone know the high level steps for copying this information Thank you, Chad

Over the years we have accumulated multiple security structures through upgrades and various projects.  I highly doubt some of the structures are being used (or at least hope) since some of them are labeled 'test' or have similar names.  We would like to remove the structures that are not being used.  Does anyone have any ideas on how I can determine if a structure is being used or not Thanks in advance! 

When we attempt to run ED501 we get a security violation when it issues the rngdbdump on the edsubtbl.  The strange thing is it happens whether we have security turned on or off.  We have this user setup with 'all access' for all of the environment utilities.  We are testing this in version 10.0.2.

WE had the DC crash that was originally used for our LDAP bind. I was able to get Lawson 'pointing' to another of our DC's. Do you know if it is possible to have Lawson 'point' to multiple DC's I would think Lawson could point to multiple DC's.

LS has more functions on some forms than what is listed in the .SCR files, the VALLSTUSE table or LAUA security.  HR11.1 has 7 additional function codes in LS than in LAUA security.  The LS Admin is getting its information from somewhere.  I need a list of all available functions for all forms including the new LS functions.  Where is this information stored

Within LSA - Rules for an Online Securable Type - Has anyone utilized the Expression Builder to create an If statement with the Global Function Utils of 'getDBField' Trying to write this against the PURCHORDER table for PO20.1 form so that once the vendor number has been added the vendor number can not be changed with the Action Function Code of 'change' for a certain role of users.  Any examples would be helpful.

I'm working on securing ESS's employee drill around in LSF9.  Some employees have a folder for Company Property in the Employee drill around but i'm having trouble locating the file to restrict.  Does anyone know what file(s) would need to be restricted

I'm trying to allow employees to make address changes via ESS however i do not want them to have access to HR11.1 screen to make any changes to their or anyones elses data.  I've tried giving full access to HR11, Employee specific access to HR11.1 using 'lztrim(table.EMPLOYEE)==lztrim(user.getEmployeeId())' and then denying access to all tabs except Address but i'm still getting the 'Address change cannot be made at this time; please contact your HR department to make this change. ...