Hi All - I recently installed MSCM (9.0.0.12) on an AIX server w/ Oracle DB.  The install of MSCM its self seems to be fine.  However, nothing appears to be getting populated from Lawson.  We specifically need to make use of RAD.  Entries in the mscm_server.log file seem to indicate that RAD is not deployed as well as information in the MSCM db/schema (see all below).  The install instructions don't seem to indicate any specific actions that need to be taken in order to install RAD.  Am I missin...

We are researching replacement models for our MC70's deployed about 3 years ago as these break, or as we expand into other areas in the hospital. What do you use and would you recommend what you have

We are working on labeling our PAR shelving with barcodes so that we can use MSCM.  I've created a custom label in Crystal reports with the barcode for the item number on it, but the handheld is not finding the item when using 'find'.  Is anyone else using a custom label for MSCM, or are you just using the labels that come from MSCM  We have our main warehouse labeled with the same barcodes and the handhelds do not have a problem reading them.

Where can I find a list of triggers for IC525 for v9/10

Hi, In the ICAUDIT table, we are able to dump the data using an SQL script. What I am struggling to find is a list of all of the field names that are associated to the field number value on that table. Does anyone know if there is such a list Would be great if we could find a list for both the ITL and ITE DB_FILES. Thanks

How can a static comment be added to the PO20 header for all PO's We want to add a static comment for freight.

We are working to automate our Bill Only PO creation.  Is there a way to flag each Bill Only so that the PO100 does not take every Bill Only, by vendor, and create on single PO

I have a location established in IC15.2 with 32 bins. The director wants to change the name of the bin id's by adding an 'S' to the beginning of each bin. I tried using add ins, but not having any success because I'm getting SOH quantity exists when I try to delete or change.   Any suggestions

Does anyone know what the required fields for RQ500 are

I am working on crystal report to pull only open POs from Purchorder and Poline (PO223) but i am getting received/full received POs too. Is there any field and value that determines POs are received/full received POs

Free to a good home (just provide your FedEx or UPS shipping account).   Two (2) 4 slot charging cradle, model CRD7000-4000E w/ AC power adapters Two (2) Single slot charging/communication cradle, model CRD7X00-1, w/ AC adapters One (1) Single slot charging/communication cradle, model CRD7X00-1, w/o AC adapter   Looking to get rid of the lot. See attachment for images. Contact me via private message if interested.

Hello - We go live with RQC next month.  Right now, when a req for stock items is entered & released, a special ID is used.  A special approval code in RQ12 helps the manager know those are his to approve & the WH130 creates pick tickets.  With RQC, the special ID goes away as we will have 1 ID for all requisitions. Once RQC is live how can the manager find his requisitions  RQ41 nearly meets our needs but under this ship to location, non stocks are also entered.   Thanks.

When a user asks to have comments printed onto MSCM delivery document from RQC they don't print.  The delivery document for the request does not include any comments.  Wondering if there's a setting somewhere I'm not aware of.

Has anyone been able to alter the format/content of the delivery document (PO Receipt document) It currently includes the bar code for tracking number, along with requesting location info, inventory location info, and deliver to info, along with line, item nbr,delivery qty, etc.  We want to add some more fields to this doc but are not sure where the format would be changed. From the MSCM Admin Guide, we see reference to the labelconfig.xml file and have taken a look at that file. Any ideas

Can anyone point me in the right direction with a warehouse lines report  I'd like to know if there are any reports in Lawson that can provide this information to me.  I ran a PO131 report and am not sure if there are any other reports.    I need to know number of lines received, number of lines distributed to the floors, and the picked lines.   Any help is greatly appreciated.   Thank you, Ardra

Has anybody encountered a problem with the MSCM database being unavailable We usually stop MSCM at about 2:00am for backups and then run a script to start MSCM at 6:00am. I put a ticket with Lawson but they don't seem to find the root cause of the problem. I looked in the server log and here is the error: [10-05-2016 06:02:55,332] INFO [com.lawson.mscm.platform.manager.StartUpBean] Successfully initialize com.lawson.mscm.sim.service.ProcessConfiguration [10-05-2016 06:02:55,379] INFO [com...

I'm so confused here. We have two pacemakers that are being ordered as specials but the cost the requisitioner is inputting is being changed/disregarded by the system.  Further investigation shows that these items have been purchased as specials in the past and it looks like Lawson is reverting to whatever the last options were set to. For example,   One item needs to be purchased at $3000 as a special but once the line is added, the cost is reverted to 'No Charge'. I checked PO63 and found a...

We have Bill-Only items that we routinely order from certain vendors and we always put them on the PO as Quantity Service because they're technically already here, and nothing will be physically received.    I would like to set up a template that they can order their items more easily.  I was going to have the items pull from agreements.   I put the items on the agreements, then when I added them to the templates on PO15, I set the type to Q.  It allows me to do this and I can select the it...

We are going to the cloud and given a turn over document.  The URL for MSCM does not work.  In Infor 10 in the Cloud, do you go into Ming.le or straight into MSCM

We have MSCM on our local v9 systems, but have since moved to the Cloud. We would like to utilize CR, but we were informed that we'd need LBI, which we don't have in our Cloud environment. Any way around this Anyone got CRAS installed on MSCM We barely use LBI to pay for the subscription.

My hospital would like to move away from using out of date MC75s.  I have to replace at least 3....  I have a feeling there will be more.  I understand the replacement for the MC75 is an MC55.  Being they are very expensive, I'd like to look to see if there is any chance of using an iOS or an Android device for our MSCM activities  I feel the next step for us should be iOS/Android.  I saw there are Infor apps in the app stores.  Can I test these apps now  Do we need to modify anything to the ...

Hi Everyone....  I am looking for a function and I don't know if it available.... If you are receiving in MSCM, there is a miscellaneous receipt function.  If a PO is not available, we do a receipt based on a tracking number.  Is there a similar function for deliveries  Do I need a Lawson tracking number for all deliveries  Can I scan something (or multiple things) and mark them as delivered, with signatures  Must I have a Lawson tracking number to use the delivery functions Does anyone ha...

Our organization has been moving away from Lawson applications since our acquisition by another company some months ago. We are currently using Lawson for Materials, AP, and General Ledger. Does anyone use Lawson Materials (Req Self Service, ordering via EDI / Fax, and IC) without using the Lawson G/L system What portions of Lawson are absolutely required for Materials to function including to place orders and match invoices Has anyone either done this from the start or else moved to that appr...

Is anyone out there running Lawson v.10 and also Q-Sight for their Cath Lab/Interventional Radiology information system  Or maybe you're not using Q-Sight but are still processing an RQ500 file formatted for v10 We started our implementation of Q-Sight a couple months ago.  I’m testing RQ500 but Owens & Minor isn’t able to find me a file that’s formatted for the Lawson 10 version with a record length of 2330. I've tried taking the file they sent and padding the records with spaces but I'm sti...

Hello - I have built out a few hundred pharmacy items in Lawson & have questions regarding NDC vs. Mfg.  While I understand that an item can have multiple NDC's based on various UOM, our buyer seems to think that NDC & Mfg/Vendor are interchangeable, so we're at a bit of a standstill. At this point, I'm only loading 1 NDC (with Drug Name & Generic Name) per Lawson item.  Also we're not managing to qty/UOM changes.  Keeping it simple at this point. Any advice would be greatly appreciated...